Dismantling Joint
Teekay Dismantling Joints facilitate the easy access and removal of equipment when it comes to long-term maintenance of piping systems. Rather than moving large sections of fixed pipework, use the Dismantling Joint to create space and easy access to pumps, valves and flowmeters.
Teekay Dismantling Joints enable up to 100 mm of longitudinal adjustment. Each joint comes with a Teekay Axiflex coupling and axial restraint is provided by the high tensile steel tie bars.
Please see below for technical specifications, or contact us to find out more.
Material Selection
Type | Casing | Coating | Fasteners | Gasket |
|---|---|---|---|---|
Type I | AISI 304/ DIN 1.4301 | Alloy Steel, PTFE coated | EPDM/NBR/HNBR/Viton | |
Type II | AISI 304/ DIN 1.4301 | AISI 316/ 316L | EPDM/NBR/HNBR/Viton | |
Type IV | AISI 316L/ DIN 1.4404 | AISI 316/ 316L | EPDM/NBR/HNBR/Viton | |
Type V | High strengh steel | Rilsan/ PVC/ Epoxy/ Galvanized | Alloy Steel, PTFE coated | EPDM/NBR/HNBR/Viton |
Type VI | High strengh steel | Rilsan/ PVC/ Epoxy/ Galvanized | AISI 316/ 316L | EPDM/NBR/HNBR/Viton |
| Document title | Filetype | Language |
|---|
| Document title | Filetype | Language |
|---|---|---|
Installation Instructions |
Material Selection
Type | Casing | Coating | Fasteners | Gasket |
|---|---|---|---|---|
Type I | AISI 304/ DIN 1.4301 | Alloy Steel, PTFE coated | EPDM/NBR/HNBR/Viton | |
Type II | AISI 304/ DIN 1.4301 | AISI 316/ 316L | EPDM/NBR/HNBR/Viton | |
Type IV | AISI 316L/ DIN 1.4404 | AISI 316/ 316L | EPDM/NBR/HNBR/Viton | |
Type V | High strengh steel | Rilsan/ PVC/ Epoxy/ Galvanized | Alloy Steel, PTFE coated | EPDM/NBR/HNBR/Viton |
Type VI | High strengh steel | Rilsan/ PVC/ Epoxy/ Galvanized | AISI 316/ 316L | EPDM/NBR/HNBR/Viton |
| Document title | Filetype | Language |
|---|
| Document title | Filetype | Language |
|---|---|---|
Installation Instructions |